|
V3.10 passive speaker |
|
|
WOOFER |
10" ferrite, 2" voice coil, paper-fiber cone, rubber surround |
|
Midrange |
6" ferrite, 1.5”€ voice coil, paper-fiber cone, treated cloth surround |
|
TWEETER |
1" horn loaded, 1†voice coil, 70° coverage angle |
|
Cross-Over |
passive, 12 db/octave, 700Hz-4Khz |
|
Power |
150W continuous - 300W musical program |
|
Sensibility |
91.5 db |
|
Peak SPL |
116 db |
|
Nominal Impedance |
4 ohm |
|
Max SPL |
116 dB |
|
Frequency response |
40Hz - 20Khz |
|
Speakers |
3 |
|
Dimensions (WxHxD) |
mm 427 x 615 x 341 - 16,8" x 24,21" x 13,42" |
|
Weight |
Kg 23,4 / Lbs 51,58 |
|
V3.8 passive speaker |
|
|
WOOFER |
8" neodymium, 1.5" voice coil, polypropylene cone with rubber-surround |
|
Midrange |
5", 1" voice coil, paper-fiber cone with rubber sorround |
|
TWEETER |
1" soft dome, wide dispersion, 1" voice coil |
|
Cross-Over |
passive, 12db/octave, 1.6KHz-6Khz |
|
Power |
100W continuos - 200W musical program |
|
Sensibility |
91db |
|
Peak SPL |
112db |
|
Frequency response |
45Hz - 20Khz |
|
Speakers |
3 |
|
Dimensions (WxHxD) |
mm 354 x 645 x 296 |
|
Weight |
Kg 13,8 |
|
|
|
|
|
|
|
V2.6 passive speaker |
|
|
WOOFER |
6.5", 1.5" voice coil, polypropylene cone with rubber surround |
|
TWEETER |
1" soft dome, wide dispersion, 1" voice coil |
|
Cross-Over |
passive, 12db/octave, 4,7Khz |
|
Power |
100W continuos - 200W musical program |
|
Sensibility |
89db |
|
Peak SPL |
108db |
|
Nominal Impedance |
8 ohm |
|
Frequency response |
65Hz - 20Khz |
|
Speakers |
3 |
|
Dimensions (WxHxD) |
mm 250 x 410 x 197 |
|
Weight |
Kg 6,6 |
|
|
|
|
|
|
|
V3.12 active speaker |
|
|
Power |
280 Watt Continuous Power |
|
Distortion (THD) |
< 0,05% up to 75 Watt rms / 4 Ohms @ 6.67 KHz |
|
Input Impedance |
15 KOhm (balanced) |
|
Input Sensitivity |
0 dB (0,775 V) |
|
Max SPL |
118 dB (Free space) |
|
Frequency response |
38-18000 Hz (+/- 3 dB) |
|
Crossover Frequency |
800 Hz @ 24 dB / oct. active - 2800 Hz @ 18 dB / oct. passive |
|
Speakers |
1 Woofer (12â€) - 1 Mid Range (8â€) - 1 Tweeter |
|
Controls |
Master Volume - Equalizer (Low - Mid Gain - Mid Freq.- High) - Remote Control (12 V D.C.) - Energy Save Function |
|
Connections |
1 Input Jack - 1 Link Jack |
|
Cabinet Features |
Laminated dark oak finish |
|
Dimensions (WxHxD) |
cm 42 x 65 x 36 - 16.53" x 25.59" x 14.17" |
|
Weight |
Kg 24 / Lbs 52,91 |
|
V-50 Sub |
|
|
Audio Inputs |
2x balanced jack - 2x balanced XLR-F |
|
Distortion (THD) |
<0.1% |
|
Input Impedance |
20Kohm (balanced) - 10Kohm (unbalanced) |
|
Input Sensitivity |
0dB (0.775V) |
|
Sensibility |
98dB (SPL 1W/1m) |
|
Audio Output |
2x balanced jack - 2x balanced XLR-F |
|
Max SPL |
126dB |
|
Frequency response |
20Hz - 100Hz (-10dB) |
|
Crossover Frequency |
63Hz @ 12dB/oct |
|
Components |
15" custom woofer |
|
Controls |
Volume - Crossover Frequency - GND lift - Phase Reverse - Stereo/mono input selector |
|
Power Supply |
refer to the label on the rear panel |
|
Cabinet Features |
Birch multilayer |
|
Output Power Max HF |
500W (IHF) |
|
Protection |
Thermal - D.C. output - Anti-bump - Anti-clipping |
|
Dimensions (WxHxD) |
cm 53 x 43 x 47 |
|
Weight |
Kg 34 |
VS.15A Sub |
|
|
Cross-Over |
95 Hz, 24 dB/oct |
|
Power |
625 Wrms, 1250 Wpeak (Class D) |
|
Audio Inputs |
2x balanced jack - 2x balanced XLR-F |
|
Distortion (THD) |
0.05% |
|
Input Impedance |
15 Kohm (balanced) |
|
Input Sensitivity |
0 dB |
|
Max SPL |
126 dB |
|
Frequency response |
30 Hz -:- 125 Hz (-3 dB) /25 Hz -:- 160 Hz (-10 dB) |
|
Components |
Woofer 15", ferrite magnet, 4" (100 mm) voice coil |
|
Controls |
Volume, phase reverse, Stereo/Mono input selection, remote control (12 V D.C.) |
|
Connections |
input :2 x balanced jack,output: 2 x balanced jack |
|
Power Supply |
AC 100 V - 240 V, 50/60 Hz with PFC |
|
Absorption |
220 W (1/8 of max output power) |
|
Cabinet Features |
Birch plywood |
|
Protection |
D.C., thermal, output short circuit, anti-boom, anti- clipping |
|
Dimensions (WxHxD) |
561 x 473 x 507 mm |
|
Weight |
38 kg |
|
V-30 active speaker |
|
|
Power |
210 Watts ( 140watts Woofer + 70 watts mid.hi ) |
|
Distortion (THD) |
( THD + N ) - Less than 0,1% |
|
Input Impedance |
20 Kohms ( balanced ) - 10 Kohms (unbalanced) |
|
Input Sensitivity |
0 dB ( 0,775 V ) |
|
Sensibility |
( SPL 1W / 1m ) 94 dB |
|
Max SPL |
118 dB |
|
Frequency response |
Hz ( -10 dB ) 20-20000 |
|
Crossover Frequency |
400 Hz@ 12dB / oct.active - 2 KHZ@6 dB / oct. |
|
Components |
1 Woofer ( 12" ) - 2 Mid Range ( 4" )and 1 Tweeter |
|
Controls |
Microphone Volume - Organ Volume - 10 Bands ISO graphic equalizer - Remote Control ( 12V D.C. ) |
|
Connections |
Input : 1 Jack Organ - 1 XLR Micro -Link : 1 Jack Aux |
|
Cabinet Features |
Wood veneered matt polished in dark or light oak (V-30) |
|
Dimensions (WxHxD) |
cm 40 x 50 76 - 15.74" x 19.68" x 29.92" |
|
Weight |
Kg. 60 / Lbs 132,2 |
|
V4.350 4 channel amplifier |
|
|
Continuous Power |
4x200 Watts at 8 ohms - 4x330 Watts at 4 ohms - 2x600 Watts at 8 ohms (Bridged mono mode) |
|
Distortion (THD) |
(SMPTE:1M) <0.1% |
|
Input Impedance |
10K Unbalanced |
|
Input Sensitivity |
1V |
|
Frequency response |
20-20.000 Hz (+0dB +/-3 dB) |
|
Voltage Gain |
30dB |
|
S/N Ratio |
103dB |
|
Controls |
AC Power switch - 2 channel level control; - inf. + 30dB |
|
Rear Controls |
30 Hz High-pass filter on/off - Bridge/stereo/parallel mode |
|
Led Indicators |
Signal present (green LED), Clip (red LED), Protection (red LED) |
|
Led Status |
blue LED integrated with Power switch |
|
Connections |
Balanced XLR-F / 1/4" Combo |
|
Power Supply |
110-220V or 220-240V (50Hz/60Hz) |
|
Protection |
on/off, mute,DC-fault,load |
|
Weight |
Kg 7.9 |
